KNOWLEDGE

summery of multistage centrifugal blower

Why cast iron are common for the casing and impeller of Roots blower? 1. Low processing difficulty coefficient Compared with stainless steel and carbon steel, cast iron has relatively low processing d

the proper processure for start and shut off roots blower

Precautions for roots blower in cold weather

The analysis for vibration of roots blower

RH roots blower from Nantong Rongheng, the most reliable roots blower supplier since 1993

​RH double stage roots blower for high pressure and volume flow,Robust yet serene, Honor forever

Except that the lubricating oil should be changed after each disassembly, the lubricating oil should be changed once in 3-6 months under normal circumstances.

The high-pressure blower can be installed at any angle, so the foundation has high requirements. Its size and bearing capacity must meet the requirements.

It is necessary to determine what function the high-pressure blower is used on the site, whether it is suction or blowing, and find the pressure-flow curve corresponding to the high-pressure blower.

With dual functions of blowing and suction, one machine can be used for both suction and blow; there is a high-pressure 4HB series high pressure blower, which can also use suction and blow at the same

​The safe operation and service life of roots blower depend on whether they are regularly maintained and maintained properly. Attention should be paid to any accidents.