Characteristics of high pressure blower

In general, high-pressure blowers have the following characteristics:

1. With dual functions of blowing and suction, one machine can be used for both suction and blow; there is a high-pressure 4HB series high pressure blower, which can also use suction and blow at the same time, which is equivalent to the function of a rotary vane vacuum pump.

2. Running with little or no oil, the output air is clean.

3. Relative to centrifugal fans and medium pressure fans, the pressure is much higher, often more than ten times that of centrifugal fans, and the highest pressure is as high as 230KPA.

4. If the pump body is integrally die-cast and shock-proof mounting feet are used, then the requirements for the installation foundation are very low, and it can run normally without fixed feet, which is very convenient and saves installation costs. And installation cycle.

5. Compared with other types of fans, such as Gaorui fans, the running noise is lower, the larger the power is, the more obvious it is, and it will be shown above 5.5KW.

6. Maintenance-free use; its wearing parts are only two bearings, and maintenance is basically not required during the warranty period.

7. The mechanical wear of the high-pressure blower is very small, because there is no other mechanical contact parts except the bearing, so the service life is of course very long. As long as it is under normal use conditions, there is no problem in 3 to 5 years. of. This is also the biggest reason for the popularity of domestic high-pressure fans.