Selection steps of high pressure blower

Because the use of high-pressure blowers is very widespread, its selection is relatively complicated. Generally, you need to follow these two steps:

1. It is necessary to determine what function the high-pressure blower is used on the site, whether it is suction or blowing, and find the pressure-flow curve corresponding to the high-pressure blower. If you read the curve incorrectly, the selected product may sometimes not be used.

2. According to the calculated pressure and flow, find the working curve above the working point corresponding to the pressure and flow on the graph; then select the high pressure blower model according to the working curve; as long as it is a different work site, its pressure and flow The requirements are different, so to get relatively accurate data, you need to perform related calculations. This needs to be carried out by a professional designer or consulting a professional company.