Energy saving transformation of blower

operation processure for RH Roots blower

1. Before operating the Roots blower, at least two people are required to cooperate, one is responsible for switch control, and the other is responsible for observation. The first thing to do is to gradually open the outlet valve  and observe the load of the motor closely to avoid overload.

2. In the process of operating the Roots blower, pay attention to the overall situation of the Roots blower and listen to whether there is any abnormal friction sound.

 3. Vibration and noise generally coexist. When operating a Roots blower, check the noise and vibration of the Roots blower according to the situation.

 4. During trial operation of Roots blower, no-load test should be performed, and no load trial operation is allowed.

 5. During the operation of the Roots blower, if it is found that the air volume or pressure is insufficient, the Roots blower should be checked. If you are not very familiar with the failure of the Roots blower, you can contact a professional for help.

 6. In the process of operating the Roots blower, pay more attention to the condition of the oil tank. The lubricating oil in the oil tank is easy to wear and should be observed. If the oil level drops severely or the lubricating oil has obvious failure, it should be replaced in time.

 7. Check the parts of the Roots blower at regular intervals to see if the reinforcement is firm and whether there is any looseness.