enLanguage
Helical Screw Roots Blower 7-15bar (101.5-217.5PSI) Mounted on Industrial Use Cheap Tractor 500 Liter with CE

Helical Screw Roots Blower 7-15bar (101.5-217.5PSI) Mounted on Industrial Use Cheap Tractor 500 Liter with CE

In water-cooled blowers, the main casing and side plates have water jackets around them, through which water is circulated, which dissipates the heat generated and keeps the internals cool. Water-cooled blowers are recommended for applications where discharge pressures exceed 10-psi (or 7000-mm WG).

Product Introduction

Since the establishment of our company, we have been constantly innovating brands and developing new circulating water chiller, roots blower repair, harbor freight vacuum pump and achieved good economic and social benefits. We firmly believe in the 'customer first, good faith-based' service tenet, in the purchase of our products, we will provide you with satisfactory service, you will not have any worries. We have established a responsive market service system.

Introduction

Water-Cooled Air Blowers are similar to air-cooled type blowers in construction and performance - except for the addition of a cooling arrangement.

In water-cooled blowers, the main casing and side plates have water jackets around them, through which water is circulated, which dissipates the heat generated and keeps the internals cool. Water-cooled blowers are recommended for applications where discharge pressures exceed 10-psi (or 7000-mm WG).


In applications where the differential pressure is in excess of 10-psig, it is both essential and recommended to dissipate the heat for efficient working and longevity of the blower bearings and seals. These blowers have a unique design of single inlet and single outlet for cooling water and no cumbersome water pipe connections externally. Internal circulation of water to various areas is achieved through in-built channels. This unique design makes the operations very simple, yet very effective. The cooling water inlet is at the bottom so that the water rises up against gravity, reaching all the corners before it comes out from the outlet. The flow rate of cooling water required are low.


Standard Design & Constructional Features

●Factory engineered, factory guaranteed, superior product

●100% oil free air delivery

●Alloy steel hardened and ground timing gears

●Anti-friction bearings

●Rotary oil seals

●Easy rotor timing setting

●No vanes, valves or rings to wear

●Large inlet and outlet connections for minimum loss

●Improved volumetric efficiency and reduced operating temp

●Alloy steel toughened shafts ground to close tolerances


Application

●Water treatment plants for backwashing of filter/mixed beds

●Effluent treatment plants for diffused aeration and agitation of effluent

●Cement plants for blending, aeration, fluidization,conveying

●Aquaculture for maintaining the dissolved oxygen content

●Electroplating plants for oil free air agitation of electrolyte

●Chemical plants for supplying of process air

●Paper plants knife edge coating,drying, conveying, vacuum pickup

●Yarn drying vacuum/pressure drying of yarn

●Polyester chip conveying and drying for transfer of polyester chips and other similar materials

●Bag filters for reverse cleaning of filter bags

●Pneumatic conveying vacuum, pressure and combination conveying of cereals, cement, husk, granules, powders and other materials.


Payment Terms and Delivery

Payment: All the payment terms are negotiable, generally by T/T or L/C.

Delivery: 35-40 days after receipt of your payment, then we arrange shipment.


FAQ

Q. How does your factory manage quality control?

A. Quality is priority .We always attach great importance to quality controlling from the very beginning to the end.


Q: What is your MOQ?

A: We have no MOQ limited for our standard specification products.


Q. What is your terms of packing?

A: Generally, we pack our goods in fumigation-free wooden case.


Q. What is your terms of payment?

A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.


Q. What is your terms of delivery?

A: Generally, we do FOB.


Our Helical Screw Roots Blower 7-15bar (101.5-217.5PSI) Mounted on Industrial Use Cheap Tractor 500 Liter with CE occupy a certain share in the market, and the development prospect is huge and have good economic value and social value. We have been striving to put the customers on the most valuable position with the best service and quality,and hope to work with all the partners to create a bright future. We try our best to provide our customers with better products and the most complete services based on the forefront of modern development, relying on science and technology and courage to explore, and has become one of the most competitive enterprises in the same industry in China.

Hot Tags: water cooled roots blower, manufacturers, suppliers, customized, wholesale, quotation, roots blower turbine, cps vacuum pump, roots dresser blower repair manual, vacuum pump autozone, roots blower model, liquid circulating chiller

Send Inquiry

whatsapp

Phone

E-mail

Inquiry